XG-20
BLUETOOTH 5.0
True Split Wireless Bluetooth Headset
USER MANUAL
DUAL EARBUDS MODE- AUTOMATIC PAIRING
(This mode is suitable for first-time use)
First step: Remove the charging insulation sticker from the back of the dual headphones and put them back into the charging case, activate both sides of the earbuds.
NOTE: If the earbuds are not charging after they are placed into the charging case, please kindly use USB charging cable as it might happen that the charging case is empty and the battery of the charging case needs to be recharged as well.
Second step: After recharging, take the two earbuds out of the charging case (both of them), they will automatically turn on, and led light will flash blue.
You will hear the voice prompt: “Power ON Pairing”, please expect the pairing process to last 7-10 seconds. After pairing is completed, you will hear the voice prompt: “Pairing Success”.
Third step: The led of the left earbud will flash red and blue alternately until it enters into the pairing mode. Please turn on the Bluetooth function on your phone and select XG-5.0 on your list. You will hear the voice prompt “Connected” once they are paired. Start enjoying music or making phone calls.
***Note: After successful pairing, every time you take earbuds out of the charging case, if the Bluetooth is turned ON on your mobile phone, they will connect to your mobile phone automatically.
DUAL EARBUDS MODE- MANUAL PAIRING
(This mode is suitable if automatic pairing fails)
First step: Press the earbud button for about three seconds until led starts flashing blue and you hear the voice prompt ”Power ON Pairing”, please expect the pairing process to last 7-10 seconds. After pairing is completed, you will hear the voice prompt: “Pairing Success”.
Second step: The led of the left earbud will flash red and blue alternately until it enters into the pairing mode. Please turn on the Bluetooth function on your phone and select XG-5.0 on your list. You will hear the voice prompt “Connected” once they are paired. Start enjoying music or making phone calls.
Note: After successful pairing, every time you take earbuds out of the charging case, if the Bluetooth is turned ON on your mobile phone, they will connect to your mobile phone automatically.
FUNCTIONS AND OPERATION
TURN ON/OFF- Long press any side of earbud (for about 4 sec) to turn it ON or OFF
PLAY/PAUSE- Light touch any side of earbuds to Play/Pause
ANSWER/ REJECT PHONE CALL- Press Main (Left headset) during the call if you want to pick up the call, or hang up. Long press the main (Left headset) for about one sec if you wish to reject the call.
PREVIOUS SONG/NEXT SONG
In the music play state, double click the left earbud to switch to the previous song.
In the music play state, double click the right earbud to switch to the next song.
VOLUME UP/ VOLUME DOWN- In the music play state, triple-click the left earbud to decrease the volume, and triple-click the right earbud to increase the volume.
WAKE UP SMART VOICE ASSISTANT (Such as Siri)- When the earbuds are under the using state or in standby mode, long-press the main (left earbud) for about 1 sec to wake up the voice assistant
TURN OFF SMART VOICE ASSISTANT (Such as Siri)- When using voice assistant, long-press the main (left earbud) for about 1 sec to turn off Siri
***Note: In the dual earbud mode, when you are using earbuds for the purposes of phone call/ talking/ voice assistant, only the microphone on the Left earbud will be active, the right microphone will not be active. As soon as the phone call is finished, the earbuds will go back to dual earbuds mode automatically.
SINGLE EARBUDS MODE- LEFT EARBUD
First step: Take the Left earbud out of the charging case, it will enter into the pairing state automatically.
Second step: Please turn on the Bluetooth function on your phone and select XG-5.0 on your list. At the same time, the right earbud should be placed into the charging case to get charged and it should be turned off
SINGLE EARBUDS MODE- RIGHT EARBUD
First step: Take the Right earbud out of the charging case, and long-press for about three seconds. It will enter into the pairing state automatically.
Second step: Please turn on the Bluetooth function on your phone and select XG-5.0 on your list. At the same time, the left earbud should be placed into the charging case to get charged and it should be turned off
EARBUDS CHARGING PROCESS
When both earbuds are placed into the charging case, the light of the LED display screen which shows the battery amount will flash green. If the green light indicator is going up and down (1-4 and 4-1), it indicates earphones are charging. When the four green lights are shown on the LED display screen, it means that earphones are fully charged. The green light on the LED display screen and earbuds will turn off automatically.
CASE CHARGING PROCESS
Please use the power cord supplied to charge the charging case.
While charging, the LED display will show the power lever, for example, 88 means the power is 88% charged. When charging is completed, the light indicator will go off.
BLUETOOTH SIGNAL
Do not cover the earbuds by ear or hand as it will interrupt the Bluetooth signal.
Please use these earbuds within their working range (10 meters) and avoid obstacles in between connected devices
PRODUCT SPECIFICATIONS
Model name: XG-20
Version: 5.0 + EDR
Charging voltage: DC 5V
Battery voltage: 3.7V
Charging time: 0.6h
Talking time: 3h
Music time: 3.5h
Work range: 10m
Battery capacity: 50mAH
Standby time: 120h
Case input current: 5V/ 1000mA
Earbud input current: 5V/ 100mA
Battery capacity: 1800 mAH
Charging time for earbuds when charged from fully charged case: 13 times
IMPORTANT NOTICE
For the first-time use, please fully charge this product
Please do not disassemble or remodel the product, it will cause a short circuit which might cause fire or completely damage the product
Don’t use earbuds on temperatures below 0 °C or above 45 °C
Avoid using the device near children, animals or people with photo-sensitivity due to strong flashing light
Don’t use earbuds under thunderstorms, it may cause device malfunction and increase the risk of electric shock
Don’t clean the product with oil or other volatile liquids
Do not let the device get wet with liquids
Do not use the device for a long time as it may cause hearing damage, arrange the use time reasonably