Ultrasonic Animal Repeller
5 adjustable modes
How does it work?
It naturally drives animals out without killing them. Made of anti-UV and waterproof material, suitable for all weather conditions.
The passive infrared sensor- PIR, detects motion and triggers the ultrasonic speaker, which then starts emitting a high-frequency sound that humans cannot hear, but it bothers animals’ hearing and nervous systems, making them feel uncomfortable and causing them to leave your space.
How do I install it?
Fit the Solar Panel into the Repeller’s body.
Attach the supporting rod to the Buzzer motor vibration device
Connect the device with the supporting rod.
Make sure to connect properly the wires from the buzzer to the device.
What is the area coverage?
Coverage Area: 30 feet to 2425 square feet, the infrared sensor angle is 110 degrees.
How can I adjust the frequency?
To adjust frequency, you must start from position 1 and then go directly to the function you need.
5 Frequencies:
13.5kHz - 19.5kHz: repels animals such as rats, dogs, foxes, martens, etc.
19.5kHz - 28.5kHz: repels animals such as cats, raccoons, badgers, skunks, etc.
400Hz - 1000Hz: mainly for snakes, mice, and other animals. Includes vibration of the stake as well.
Strong LED flashes and high-frequency sounds are being emitted, which can drive away raccoons, birds, boars, crickets, and other animals.
Repels all animals with variable frequency and strong LED flashing. It will shift frequency (1-4), changing it every 5 seconds. Includes lights, sounds, and vibrations.
Will it bother my pets?
The product is an animal repeller and it will bother different animals that have a similar hearing frequency range.
However, the unit is adjustable, and you can set the frequency just to deter unwanted animals without affecting your pets. Or you can also turn it OFF any time you need.
It won’t harm them or hurt their hearing sense, it will only make them step away from that area.
Mode 2-3-4: safe for your dog.
Mode 1-3-4: Safe for your cat.
Mode 1-2-3: Safe for your birds.
How can I recharge it?
It uses SOLAR energy technology and charges itself under the sun, and it also has a USB port and you can recharge it with the USB cable (included in the package) as well.
Make sure to put the product in a place where it can catch most of the sunshine during the day to enable fast and sufficient recharge.
If the rechargeable battery in the product hasn’t been used for an extended period of time (more than one month), the battery’s power may be depleted. It is suggested to charge the battery using the USB cable to fully recharge. A USB cable is included in the package. When charging, the LED light on the device turns blue. Once fully charged the light will turn green. A red light appears when the device is in an operational state.
What batteries does it use?
It uses a lithium battery (3.7V, 1000MAh) and can be recharged by solar panel or USB.
Is it weatherproof?
Yes, it is made of anti-UV and waterproof material, suitable for all weather conditions.
Can I adjust the sensitivity?
Yes, switch the Sensitivity adjustment key to change the sensitivity of the PIR sensor. Turning the knob clockwise is going to increase the sensitivity and detection distance (even small animals with little movements can activate the unit at the most sensitive position).
What is the size?
What does the package include?
Solar panel compartment- 1
Repeller’s “head”- 1
Vibration stake- 1
USB cable for recharging- 1
User manual- 1