Upgraded Multipurpose
Steam Cleaner
Our device utilizes hot, pressured water steam to deep clean and eliminate stains and grease from all household surfaces.
Open the valve cup.
Pour up to 70 oz water.
Turn it on and wait for the light indicator to switch off.
Attach the needed accessories and start cleaning.
Our Steam Cleaner comes with an extra-long 10ft power cord and a 7ft steam hose.
Our Multipurpose Steam cleaner can be used everywhere: ceramic tiles, granite countertops, sealed wood flooring, laminate, appliances, cars, or grills, leaving them spotless and residue-free.
Note:
Walls:
Always test a small, inconspicuous area before proceeding with extensive cleaning.
The steam can help remove soap scum, mold, and mildew, but first, please be mindful of the type of paint or wall covering. If your walls have wallpaper or are painted with water-based paint, excessive moisture from a steam cleaner could cause damage.
Electrical appliances:
Always consult your appliance user manual to ensure it is safe to use it.
The high-temperature steam can help loosen and dissolve grease and grime, making it easier to wipe away. However, be cautious not to use the steam cleaner on electrical components or areas where moisture could cause damage.
Yes, it is a very effective method to get rid of bed bugs. They are sensitive to heat, and steam cleaners can generate the high temperatures needed to kill them.
How to Use a Steam Cleaner to Eliminate Bed Bugs?
First, remove all bedding and wash it in hot water (at least 120°F/49°C) to kill any bed bugs and their eggs.
Begin by vacuuming the area thoroughly to remove any debris and eggs.
Use our steam cleaner with a high-temperature setting, preferably above 120°F (49°C). Our steam cleaner steams up to 360°F (160°C).
Treat all areas where bed bugs may be hiding, including mattresses, box springs, bed frames, and upholstered furniture.
Hold the steam cleaner over each area for at least 30 seconds to ensure that the heat penetrates deeply enough to kill the bugs and their eggs.
After steam cleaning, allow the area to dry completely.
Repeat the process as necessary until all bed bugs are eliminated. They are completely gone in 2 to 7 days!
Note:
-Never clean the water tank while it is still hot.
-Always turn off and unplug the Steamer before cleaning.
-Do not use detergent to clean the tank.
Mix a 50/50 solution of 250 ml of white vinegar and 250 ml of water. You can use the measuring cup.
Pour the solution into the unheated cold tank using the funnel.
Leave the solution in the tank for about 30 minutes.
After 30 minutes, empty the tank.
Repeat steps 1 to 4, if necessary.
Rinse well with water.
Replace the tank filler cap and store it in a safe and dry place.
Floor brush connector
Inflating nozzle
Glass scraper
High-pressure nozzle
Copper wire brush
Round brush
Extension rod
Ironing brush
Floor brush
Shim
Funnel
Graduated glass
Towel cover
Floor brush towel
Overheat fuse
Seal ring
