Mini Portable 

Space Heater








Our Mini Portable Space Heater will keep you cozy with a customizable temperature Range from 15°C to 32°C (60°F to 90°F), depending on your needs and preferences.


It offers overheat protection, precision control, programming, and automatic turn-off features suited to individual preferences.



ENERGY SAVING:


  • When the room temperature is lower than the set temperature, the heat will go ON.

  • When the room temperature is higher than the set temperature, the heat will go OFF.




SET UP 


  • Make sure that the heater is switched off (O pushed in) then plug it into a correctly functioning socket.


  • Set the main switch to ON (I pushed in). The heater will be on standby and the indicator light will light up.



  • Switch on the heater by pressing the ON/STANDBY BUTTON.

  • When you turn it ON, the thermostat will be at the maximum temperature: 32°C/90°F


Press the "Temperature lower" or "Temperature higher" buttons to set the desired temperature (minimum 15°C/60°F- maximum 32°C/90°F). 



The display will show the set temperature.




  • The thermostat will now regulate the heater to turn on if the temperature is too low and off once the desired temperature is reached.


  • Press Temp+ and Temp- simultaneously to speed up the fan or slow it down.


The display shows for a moment flashing what you have set: LL= low HH=high.


  • Press the timer button to set the timer. 


The display changes from degrees to hours. Hold in button to enter more hours, up to a maximum of 12.


If you set the timer while the heater is on, you set the number of hours after which it turns itself off. 


  • To switch off the heater you must first set it to standby by pressing the ON/standby button. The heater will stop heating, but the fan cools for another 60 seconds before switching off. You can then use the main switch to turn off the heater properly (O pressed).


Never leave the plug in the socket when the heater is not in use.











It operates on AC 220-240V, 50-60Hz, adapting to various power supplies. It does not use any batteries.





Our Portable Heater covers Up to 10 m2 Spaces. 

It is ideal for bedrooms, offices, living rooms, bathrooms, and other smaller living areas.




Functions:


  • ▶॥: Switch ON/OFF


  • Timer: 

The display changes from degrees to hours. Hold in button to enter more hours, up to a maximum of 12.

If you set the timer while the heater is on, you set the number of hours after which it turns itself off. 


  • Temp - :

Press this button to set the desired temperature to a minimum of 15°C/60°F.


  • Temp + :

Press this button to set the desired temperature to a maximum of 32°C/90°F.


  • Speed:

Press this button to speed up the fan or slow it down.




Keep the heater clean to avoid overheating by removing the dust/dirt from the heater.


  • Switch off the heater, remove the plug from the socket, and allow the heater to cool down before cleaning or carrying out maintenance work.

  • Do not use aggressive soaps, sprays, cleaners abrasives, waxes, polishes, or chemical solutions- Make sure that no water gets into the device.

  • You can use a vacuum cleaner to carefully remove any dust and dirt from the grills. Be careful not to touch or damage any internal parts during cleaning.

  • There are no other parts that need maintenance. The appliance may only be opened and /or repaired by properly authorized and qualified persons.

  • To store please clean the heater, and put it upright, in the original packaging if possible, in a cool, dry, and dust-free place.



  • 1 x Heater

  • 1 x Remote Control

  • User Manual